Template:IPstack Template:HTTP Hypertext Transfer Protocol (HTTP) is a communications protocol for the transfer of information on the intranet and the World Wide Web. Its original purpose was to provide a way to publish and retrieve hypertext pages over the Internet.
HTTP development was coordinated by the World Wide Web Consortium (W3C) and the Internet Engineering Task Force (IETF), culminating in the publication of a series of Request for Comments (RFCs), most notably RFC 2616 (June 1999), which defines HTTP/1.1, the version of HTTP in common use.
HTTP is a request/response standard between a client and a server. A client is the end-user, the server is the web site. The client making an HTTP request - using a web browser, spider, or other end-user tool - is referred to as the user agent. The responding server - which stores or creates resources such as HTML files and images - is called the origin server. In between the user agent and origin server may be several intermediaries, such as proxies, gateways, and tunnels. HTTP is not constrained to using TCP/IP and its supporting layers, although this is its most popular application on the Internet. Indeed HTTP can be "implemented on top of any other protocol on the Internet, or on other networks. HTTP only presumes a reliable transport; any protocol that provides such guarantees can be used."
Typically, an HTTP client initiates a request. It establishes a Transmission Control Protocol (TCP) connection to a particular port on a host (port 80 by default; see List of TCP and UDP port numbers). An HTTP server listening on that port waits for the client to send a request message. Upon receiving the request, the server sends back a status line, such as "HTTP/1.1 200 OK", and a message of its own, the body of which is perhaps the requested file, an error message, or some other information.
The reason that HTTP uses TCP and not UDP is because much data must be sent for a webpage, and TCP provides transmission control, presents the data in order, and provides error correction. See the difference between TCP and UDP.
Request message[edit | edit source]
The request message consists of the following:
- Request line, such as GET /images/logo.gif HTTP/1.1, which requests the file logo.gif from the /images directory
- Headers, such as Accept-Language: en
- An empty line
- An optional message body
The request line and headers must all end with <CR><LF> (that is, a carriage return followed by a line feed). The empty line must consist of only <CR><LF> and no other whitespace. In the HTTP/1.1 protocol, all headers except Host are optional.
A request line containing only the path name is accepted by servers to maintain compatibility with HTTP clients before the HTTP/1.0 specification.
Request methods[edit | edit source]
HTTP defines eight methods (sometimes referred to as "verbs") indicating the desired action to be performed on the identified resource.
- Asks for the response identical to the one that would correspond to a GET request, but without the response body. This is useful for retrieving meta-information written in response headers, without having to transport the entire content.
- Requests a representation of the specified resource. By far the most common method used on the Web today. Should not be used for operations that cause side-effects (using it for actions in web applications is a common misuse). See 'safe methods' below.
- Submits data to be processed (e.g. from an HTML form) to the identified resource. The data is included in the body of the request. This may result in the creation of a new resource or the updates of existing resources or both.
- Uploads a representation of the specified resource.
- Deletes the specified resource.
- Echoes back the received request, so that a client can see what intermediate servers are adding or changing in the request.
- Returns the HTTP methods that the server supports for specified URI. This can be used to check the functionality of a web server by requesting '*' instead of a specific resource.
- Converts the request connection to a transparent TCP/IP tunnel, usually to facilitate SSL-encrypted communication (HTTPS) through an unencrypted HTTP proxy.
HTTP servers are supposed to implement at least the GET and HEAD methods and, whenever possible, also the OPTIONS method.
Safe methods[edit | edit source]
Some methods (e.g. HEAD, GET, OPTIONS, and TRACE) are defined as safe, which means they are intended only for information retrieval and should not change the state of the server (in other words, they should not have side effects). Repetition of the same GET request should therefore be harmless. Repetition of unsafe methods (such as POST, PUT and DELETE) should draw special attention, typically as a dialog box requesting confirmation of the action. This is because repeated requests can cause side effects, such as unwanted duplication of a transaction.
Despite the prescribed safety of GET requests, in practice their handling by the server is not technically limited in any way, and careless or deliberate programming can just as easily (or more easily, due to lack of user agent precautions) cause non-trivial changes on the server. This is discouraged, because it can cause problems for Web caching, search engines and other automated agents, which can make unintended changes on the server. Another case is that a GET request may cause the server to create a cache space.
Idempotent methods and web applications[edit | edit source]
Methods PUT and DELETE are defined to be idempotent, meaning that multiple identical requests should have the same effect as a single request. Methods GET, HEAD, OPTIONS and TRACE, being prescribed as safe, should be idempotent.
The RFC allows a user-agent, such as a browser, to assume that any safe method can be retried without informing the user. This is done to improve the user experience when connecting to unresponsive or heavily-loaded web servers.
However, note that idempotence is not enforced by the protocol or web server. It is perfectly possible to write a web application in which (e.g.) a database insert or update is triggered by a GET request - this would be a very normal example of what the spec refers to as "a change in server state."
This misuse of GET can combine with the retry behavior above to produce erroneous transactions - and for this reason GET should be avoided for anything transactional - and used, as intended, for document retrieval only.
HTTP versions[edit | edit source]
HTTP has evolved into multiple, mostly backwards-compatible protocol versions. RFC 2145 describes the use of HTTP version numbers. The client tells in the beginning of the request the version it uses, and the server uses the same or earlier version in the response.
- Deprecated. Supports only one command, GET, which does not specify the HTTP version. Does not support headers. Since this version does not support POST, the client cannot pass much information to the server.
- HTTP/1.0 (May 1996)
- This is the first protocol revision to specify its version in communications and is still in wide use, especially by proxy servers.
- HTTP/1.1 (June 1999)
- Current version; persistent connections enabled by default and works well with proxies. Also supports request pipelining, allowing multiple requests to be sent at the same time, allowing the server to prepare for the workload and potentially transfer the requested resources more quickly to the client.
- The initial 1995 working drafts of the document PEP – an Extension Mechanism for HTTP (which proposed the Protocol Extension Protocol, abbreviated PEP) were prepared by the World Wide Web Consortium and submitted to the Internet Engineering Task Force. PEP was originally intended to become a distinguishing feature of HTTP/1.2. In later PEP working drafts, however, the reference to HTTP/1.2 was removed. The experimental RFC 2774, HTTP Extension Framework, largely subsumed PEP. It was published in February 2000.
The major changes between HTTP/1.0 and HTTP/1.1 include the way HTTP handles caching; how it optimizes bandwidth and network connections usage, manages error notifications; how it transmits messages over the network; how internet addresses are conserved; and how it maintains security and integrity.
Status codes[edit | edit source]
Template:See also In HTTP/1.0 and since, the first line of the HTTP response is called the status line and includes a numeric status code (such as "404") and a textual reason phrase (such as "Not Found"). The way the user agent handles the response primarily depends on the code and secondarily on the response headers. Custom status codes can be used since, if the user agent encounters a code it does not recognize, it can use the first digit of the code to determine the general class of the response.
Also, the standard reason phrases are only recommendations and can be replaced with "local equivalents" at the web developer's discretion. If the status code indicated a problem, the user agent might display the reason phrase to the user to provide further information about the nature of the problem. The standard also allows the user agent to attempt to interpret the reason phrase, though this might be unwise since the standard explicitly specifies that status codes are machine-readable and reason phrases are human-readable
Persistent connections[edit | edit source]
- Main article: HTTP persistent connections
In HTTP/0.9 and 1.0, the connection is closed after a single request/response pair. In HTTP/1.1 a keep-alive-mechanism was introduced, where a connection could be reused for more than one request.
Such persistent connections reduce lag perceptibly, because the client does not need to re-negotiate the TCP connection after the first request has been sent.
Version 1.1 of the protocol made bandwidth optimization improvements to HTTP/1.0. For example, HTTP/1.1 introduced chunked transfer encoding to allow content on persistent connections to be streamed, rather than buffered. HTTP pipelining further reduces lag time, allowing clients to send multiple requests before a previous response has been received to the first one. Another improvement to the protocol was byte serving, which is when a server transmits just the portion of a resource explicitly requested by a client.
HTTP session state[edit | edit source]
HTTP is a stateless protocol. The advantage of a stateless protocol is that hosts do not need to retain information about users between requests, but this forces web developers to use alternative methods for maintaining users' states. For example, when a host would like to customize content for a user while visiting a website, the web application must be written to track the user's progress from page to page. A common method for solving this problem involves sending and requesting cookies. Other methods include server side sessions, hidden variables (when current page is a form), and URL encoded parameters (such as
Secure HTTP[edit | edit source]
There are currently two methods of establishing a secure HTTP connection: the https URI scheme and the HTTP 1.1 Upgrade header, introduced by RFC 2817. Browser support for the Upgrade header is, however, nearly non-existent, hence the https URI scheme is still the dominant method of establishing a secure HTTP connection.
HTTPS URI scheme[edit | edit source]
- Main article: HTTPS
HTTPS: is a URI scheme syntactically identical to the http: scheme used for normal HTTP connections, but which signals the browser to use an added encryption layer of SSL/TLS to protect the traffic. SSL is especially suited for HTTP since it can provide some protection even if only one side of the communication is authenticated. This is the case with HTTP transactions over the Internet, where typically only the server is authenticated (by the client examining the server's certificate).
HTTP 1.1 Upgrade header[edit | edit source]
HTTP 1.1 introduced support for the Upgrade header. In the exchange, the client begins by making a clear-text request, which is later upgraded to TLS. Either the client or the server may request (or demand) that the connection be upgraded. The most common usage is a clear-text request by the client followed by a server demand to upgrade the connection, which looks like this:
GET /encrypted-area HTTP/1.1 Host: www.example.com
HTTP/1.1 426 Upgrade Required Upgrade: TLS/1.0, HTTP/1.1 Connection: Upgrade
The server returns a 426 status-code because 400 level codes indicate a client failure (see List of HTTP status codes), which correctly alerts legacy clients that the failure was client-related.
The benefits of using this method for establishing a secure connection are:
- that it removes messy and problematic redirection and URL rewriting on the server side,
- it allows virtual hosting (single IP, multiple domain-names) of secured websites (but so does https with Server Name Indication), and
- it reduces user confusion by providing a single way to access a particular resource.
A weakness with this method is that the requirement for secure HTTP cannot be specified in the URI. In practice, the (untrusted) server will thus be responsible for enabling secure HTTP, not the (trusted) client.
Sample[edit | edit source]
Below is a sample conversation between an HTTP client and an HTTP server running on www.example.com, port 80.
GET /index.html HTTP/1.1 Host: www.example.com
Server response (followed by a blank line and text of the requested page):
HTTP/1.1 200 OK Date: Mon, 23 May 2005 22:38:34 GMT Server: Apache/184.108.40.206 (Unix) (Red-Hat/Linux) Last-Modified: Wed, 08 Jan 2003 23:11:55 GMT Etag: "3f80f-1b6-3e1cb03b" Accept-Ranges: bytes Content-Length: 438 Connection: close Content-Type: text/html; charset=UTF-8
The ETag (entity tag) header is used to determine if the URI cached is identical to the requested URI on the server. Content-Type specifies the Internet media type of the data conveyed by the http message, while Content-Length indicates its length in bytes. The HTTP/1.1 webserver publishes its ability to respond to requests for certain byte ranges of the document by setting the header Accept-Ranges: bytes. This is useful if the client needs to have only certain portions of a file sent by the server, which is called byte serving. When Connection: close is sent in a header, it means that the web server will close the TCP connection immediately after the transfer of this package.
See also[edit | edit source]
- Basic access authentication
- Content negotiation
- Digest access authentication
- HTTP compression
- List of file transfer protocols
- List of HTTP status codes
- List of HTTP headers
- Web cache
References[edit | edit source]
ar:بروتوكول نقل النص الفائق az:HTTP bn:হাইপার টেক্সট ট্রান্সফার প্রোটোকল bs:Hypertext Transfer Protocol bg:HTTP ca:Protocol de transferència d'hipertext cs:Hypertext Transfer Protocol cy:HTTP da:HTTP de:Hypertext Transfer Protocol et:Hypertext Transfer Protocol el:Πρωτόκολλο Μεταφοράς Υπερκειμένου es:Hypertext Transfer Protocol eo:Hiperteksto-Transiga Protokolo eu:HTTP fa:پروتکل انتقال ابرمتن fr:Hypertext Transfer Protocol ga:Prótacal Aistrithe Hipirtéacs gl:HTTP ko:HTTP hr:HTTP id:HTTP is:HTTP it:HTTP he:Hypertext Transfer Protocol kk:HTTP lv:HTTP lb:Hypertext Transfer Protocol lt:HTTP hu:HTTP ml:എച്ച്.ടി.ടി.പി. ms:HTTP nl:Hypertext Transfer Protocol ja:Hypertext Transfer Protocol no:HTTP nn:Hypertext Transfer Protocol pl:Hypertext Transfer Protocol pt:HTTP ro:HTTP ru:HTTP sq:HTTP simple:Hypertext Transfer Protocol sk:Hypertext Transfer Protocol sl:HTTP sr:HTTP sh:HTTP fi:HTTP sv:HTTP tl:HTTP th:Hypertext Transfer Protocol vi:Hypertext Transfer Protocol tr:HTTP uk:HTTP
- Template:Cite web
- First release of HTTP/1.1 specification is dated January 1997 Template:Inet-note-ref
- Latest release of HTTP/1.1 specification is dated June 1999 Template:Inet-note-ref
- PEP: An Extension Mechanism for HTTP. Quote: "For experimental purposes, PEP-compatibility is equated with HTTP/1.2."
- AT&T research on HTTP 1.0 and 1.1.
- 6.1 Status-Line
- draft-ietf-http-range-retrieval-00 - Byte Range Retrieval Extension to HTTP